Brother Printer Won't Scan

Brother Printer Won’t Scan: Get Scanning Again

Byadmin

Do you have an urgency to scan a document? Well, how frustrating it is when your Brother printer won’t scan your computer. It is just like you are left staring at an error message or a printer that simply does nothing. This issue is common, but you need to make sure that this fix does not have to be complicated.

There are several causes for your Brother printer won’t scan to computer. It can be due to software conflicts, network issues, or obsolete drivers. But you need not be worried at all. This guide is here to help you troubleshoot the issue more conveniently. After exploring this guide, you will be aware of the proven troubleshooting and expert insights. Then, you will also walk through the exact steps on how to fix Brother printer won’t scan problems.

Wanna resolve the scanning issues with your Brother printer more quickly and efficiently? If yes, it’s worth reading this post carefully. Let’s go through this post and get your printer back to scanning in just a few minutes……

Why Brother Printer Won’t Scan To Computer

Are you going ahead to have a glance at the reliable solutions to resolve the Brother Printer Won’t Scan To Computer issue? Wait!! You need not do it if you are not aware of the key factors responsible for this issue. Once you know the root cause, it will help you to fix the issue faster and prevent it from recurring. So, without much delay, you need to have an eye on the key reasons given below –

1. Connectivity Issues

Suppose, if your Brother printer is not properly connected to your network or USB cable, it won’t communicate with your computer device. Thus, it blocks scanning.

2. Outdated or Missing Drivers

Scanning functions depend on a specific driver. In case your printer driver or Brother ControlCenter software is obsolete or missing, there is a possibility of the failure of the scanning.

3. Firewall or Antivirus Conflicts

In some cases, firewall settings or security software can prevent your printer from sending scanned documents to your computer.

4. Incorrect Scan Settings

Incorrect scan destination settings or misconfigured scanning preferences in Brother’s software could cause scanning to fail.

5. Software Glitches

Temporary bugs & glitches in the Brother Software suite or Windows/macOS system can surely affect scanner detection or response.

How To Fix Brother Printer Won’t Scan: Quick And Simple Fixes

Now that you are aware of the key factors that cause the Your Brother Printer Won’t Scan issue. So, it’s time to familiarize yourself with the simplest steps that work for all users. Why are you wasting your time on useless things? It’s high time to have a glance at the reliable tips to nip this issue in the bud. Let’s go ahead….

Step 1: Check the Printer Connection

For USB Users:

Being a USB user, you need to confirm that the cable is properly connected and not damaged. For this, you can try a different USB port.

For Wireless Users:

In this case, you need to make sure that your printer and computer device are on the same Wi-Fi network.

Note: It is a must for you to keep this thing in mind that it is a must for you to print a Network Configuration Report from the printer. It will be helpful for you to verify the connection.

Step 2: Restart Devices

  • At the beginning of the process of restarting your devices, you need to power off your printer, computer, and router.
  • Now, wait for 30 seconds.
  • In the next step, you need to restart all devices and try scanning again.

Step 3: Reinstall Brother Software and Drivers

  • First of all, you need to go to the official Brother Support website.
  • After that, download the latest Full Driver & Software Package for your model.
  • Then, install it and follow the prompts.
  • In the last step, this will start updating the drivers, ControlCenter software, and scanning utilities.

Step 4: Use Brother ControlCenter or the iPrint&Scan App

  • Initially, you need to launch Brother ControlCenter4 (Windows) or iPrint&Scan (macOS).
  • In this step, you need to choose your model from the list.
  • Later on, you are required to click Scan and select the destination. It will enable you to run a test scan.
  • Thereafter, if the ControlCenter doesn’t detect the device, you have to reconfigure the device or reinstall the software.

Step 5: Check Firewall and Security Settings

  • In the first step of the verification of the firewall and security settings, you have to temporarily disable your firewall or antivirus.
  • Then, you need to try to scan again with the use of the Brother software.
  • Later on, if scanning works, you need to add the Brother apps to the ControlCenter. Because it doesn’t detect the device
  • Suppose, if scanning does not work, you need to add the Brother apps to the “Allowed List.” Or there can also be several exceptions in your security software, too.

Step 6: Set the Scanner as Default

  • To kick-start the process of setting the scanner as the Default, you need to go to Devices and Printers (Windows).
  • Now, you need to right-click on your Brother printer or scanner.
  • Then, choose “Set as default scanner”.
  • In the final step, you need to try to scan again through the software or device panel.

Bottom-line,

In a nutshell, after exploring this post, you will be able to eliminate the Brother printer won’t scan issue. You need not be worried at all as this issue is a fixable issue. By following the step-by-step methods given in this post, you will know how to fix Brother printer won’t scan and brother printer setup. Now, it will be easy for you to curb this issue in just a few minutes. Once you start updating your printer software regularly, you can confirm proper connections. You can also check the security settings of your system so that you can avoid the issue in the future. In case, the scanning does not work after trying everything, you should contact the support team. Or you can also cross-check for hardware-related faults.